Showing all 24 results
Mercury 1.5KVA Rackmount Smart-UPS
Mercury 1050VA Offline Backup UPS
Mercury Maverick 1050 UPS Offline 1050VA/630W 2X Universal Socket
key features
BATTERY, UK POWER CORD
MERCURY maverick 1050VA Offline UPS
1050VA/630 watts
2X UNIVERSAL SOCKET,
9AH BATTERY,
UK POWER CORD
Mercury 1050VA ups protection : Short circuit, Overload, Battery discharge and overcharge, Surge Protection
Mercury 10KVA /8KW single phase Online Smart UPS
Mercury 10KVA /8KW Three phase Online Smart UPS
- Capacity: 10kVA; Power: 9kW
- Battery Voltage: 384VDC (32 x 12V) - Batteries not included
- External Battery
- Model: Mercury EP10K
- Technology: Double Conversion Online
- Load Bus Synchronization (LBS) Function
- Advanced IGBT Rectifier To Have Low THDi & High PF
- LCD Indication & Audible Alarm Function
- Front Accessible Module Design For Ease Of Maintenance
- Wide Input Voltage Range
- Intelligent Battery Management
- Flexibility Of Configurable Battery Bank
Mercury 12V 7.5AH Sealed Leaded UPS battery
MERCURY 12V 9AH UPS replacement battery
Mercury 1550VA Backup Offline UPS
Features Automatic restart of loads after UPS shutdown – Automatically starts up the connected equipment upon the return of utility power. Automatic self-test – Periodic battery self-test ensures early detection of a battery that needs to be replaced. Automatic Voltage Regulation (AVR) – Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Resettable circuit breaker – Easy recovery from overloads; no need to replace a fuse.
Mercury 20KVA/18KW 3 phase online UPS, MDC3320S
- Capacity: 20kVA (kilovolt-ampere)
- Power Rating: 18kW (kilowatts)
- UPS Topology: Online Double Conversion
- Input Voltage: 3-Phase, 380/400/415VAC
- Output Voltage: 3-Phase, 380/400/415VAC
- Frequency: 50/60Hz
- Efficiency: High efficiency at full load and partial load
- Battery Type: External batteries required for extended runtime (not included)
- Communication Ports: RS232, USB, SNMP
Mercury 2KVA Online smart UPS, HP920C-S 0.8PF
- Capacity: 2KVA / 1600W
- Phase: Single Phase
- Technology: High frequency and double conversion online technology
- Fully digitized microprocessor control
- Wide input voltage range: 115VAC(±5) ~ 295VAC(±5) if load ≤ 70%
- LCD
- UPS startup without battery
- Cold start
- Advanced battery management
- Automatic battery charge in UPS off-mode
- Lightning and surge protection
- Short circuit and overload protection
- Fan speed auto control when loads vary
- Network/Fax/Modem surge protection
- Optional extension battery pack
- Battery voltage display
- Load capacity display
- EMI/RFI noise filter
- Smart RS232 communication with monitoring software
- Optional SNMP Card slot
- EPO function(optional)
- Input L and N reversed alarm function
- Battery: 3x 12V / 7AH
- Ideal applications: Small network, servers, and other IT equipment
Mercury 2KVA smart Online Tower UPS, MPM-2K
- Capacity: 2KVA / 1400W; Single Phase
- Technology: High frequency & double conversion on-line
- Fully digitized microprocessor control
- Wide input voltage range: 115VAC(±5) ~ 295VAC(±5) if load ≤ 70%
- LCD display
- UPS startup without battery
- Cold start
- Advanced battery management
- Automatic battery charge in UPS off mode
- Lightning & surge protection
- Short circuit & overload protection
- Fan speed auto control when load varies
- Network/Fax/Modem surge protection
- Optional extension battery pack
- Battery voltage & Load capacity display
- Smart RS232 communication with monitoring software
- Optional SNMP Card slot
- Input L and N reversed alarm function
Mercury 3KVA smart Online Rackmount UPS, MPM-3K-RT
- Capacity: 3KVA (3000VA)
- Power Rating: 2.7KW (2700W)
- Rackmount/Tower convertible design for flexible installation options
- LCD display for real-time UPS status monitoring
- Pure sine wave output for clean and stable power delivery
- Advanced DSP digital control technology for enhanced performance and reliability
- Wide input voltage range for compatibility with various power sources
- Automatic voltage regulation (AVR) to stabilize voltage fluctuations
- Hot-swappable batteries for easy maintenance and uninterrupted power supply
- Intelligent battery management system to prolong battery life
Mercury 3kva smart Online Tower UPS, MPM-3K
Mercury 6240U-4U 1.8M Surge Protector Extension Cable
Mercury Elite 2000U SMART Offline UPS 2000VA | 2KVA
Specification
Rating input voltage | 2000 VA / 1200 W |
Rating input frequency | 60/50Hz (auto sensing) |
Input phase | Single-phase |
Input socket | With Fuse |
Cold Start (0 to 100% load) | Press the ON/OFF Switch |
Input Range (220V) | 140-300 |
Rating output(VA) | 2000 |
Rating output (W) | 1200 |
Power factor | 0.6 |
Rating output voltage (V) | 220 |
Waveform | Battery mode (simulated sine wave), AC mode(sine wave) |
AC Voltage Regulation | ±10% (Battery mode) |
Rear output socket | 4 x Universal - Battery backup |
Waveform | Simulated Sine Wave (Battery mode) |
Line Mode | Synchronize with the utility |
Rating frequency | 60Hz or 50 Hz ± 1 Hz |
Battery Mode | Yellow flashing |
Short circuit protection Line Mode | Fuse & Firmware protection |
Short circuit protection Battery Mode | Firmware Protection |
Overload protection Line Mode | 110%±5%; Go to fault mode Line Mode after 5 minutes, 120%±5%; Go to fault mode immediately. |
Overload protection Battery Mode | 110%±5%; Shutdown after 5 seconds, 120%±5%, Shutdown immediately |
Indicators AC mode | Green Lighting |
Indicators Battery Mode | Yellow Flashing |
Indicators Fault | Red Lighting |
Alarm Battery Mode | Sounding every 10 Seconds |
Alarm Low Battery | Sounding every Second |
Alarm Overload | Sounding every 0.5 second |
Alarm Fault | Continuously sounding |
Full Protection | Overload, discharge, and Overcharge protection |
Transfer Time | Typical 2-6ms, 10ms max. |
Transfer Time | Typical 2-6ms, 10ms max. |
Communication Interface | Optional RS232/RJ11 |
Battery and runtime Rating | 2 X 12V/9AH |
Recharge time - Typical | 6-8 hours recover to 90% capacity |
Charge current | About 1A at normal mode. |
Dimension, W X H X D (cm) | 22.5 X 12.5 X 39 |
Net Weight (kgs) | 12.7KGS |
Humidity | 0-90 % RH @ 0- 40°C (non-condensing) |
Noise Level | Less than 45dB |
Compatible with OS | Supports Windows® 2000/2003/XP/Vista/2008/7 |
Communication interface | Elite 2000pro (N/A), Elite 2000ipro (USB/RJ11) |
Mercury Elite 3000U SMART Offline UPS -UK Plug, 3000VA/1800W UPS
- Model: Mercury 3KVA Line-interactive UPS
- Capacity: 3000VA (3kVA)
- Technology: Line-interactive UPS
- Input Voltage: 220VAC
- Output Voltage: 220VAC
- Input Frequency Range: 45Hz - 65Hz
- Output Frequency: 50Hz or 60Hz (auto-sensing)
- Waveform: Simulated sine wave
- Transfer Time: ≤ 4ms
- Battery Type: Sealed lead-acid maintenance-free battery
- Battery Backup Time: Varies depending on the load
- Battery Recharge Time: Approximately 4 to 6 hours
- Communication Ports: USB, RS232
Mercury Elite 650 Pro Line Interactive UPS
Mercury Envy 3KVA UPS, 2.7KW Rackmount/Tower Smart Ups
Mercury 3KVA Rackmount UPS Specifications
- Capacity: 3KVA (3000VA)
- Power Rating: 2.7KW (2700W)
- Rackmount/Tower convertible design for flexible installation options
- LCD display for real-time UPS status monitoring
- Pure sine wave output for clean and stable power delivery
- Advanced DSP digital control technology for enhanced performance and reliability
- Wide input voltage range for compatibility with various power sources
- Automatic voltage regulation (AVR) to stabilize voltage fluctuations
- Hot-swappable batteries for easy maintenance and uninterrupted power supply
- Intelligent battery management system to prolong battery life
- Built-in surge and overload protection to safeguard connected devices
- Audible alarms and LED indicators for easy status notification
- USB and RS232 communication ports for remote monitoring and management
- Compatible with the UPSilon2000 software for advanced control and configuration
- Supports generator compatibility for additional backup power options
- Energy-saving mode to optimize efficiency and reduce power consumption
- Designed for reliable and continuous operation in demanding environments.
Mercury Envy Series 1-10KVA Rail Kit
MERCURY MAVERICK 1050VA Offline UPS, 1050VA/630W
Mercury Maverick 1550VA Offline UPS, 1550VA/930W 4X Universal Socket
Mercury Maverick 1550 UPS Offline 1550VA/930W 4X Universal Socke
key features Automatic restart of loads after UPS shutdown – Automatically starts up the connected equipment upon the return of utility power. Automatic self-test – Periodic battery self-test ensures early detection of a battery that needs to be replaced. Automatic Voltage Regulation (AVR) – Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment. Resettable circuit breaker – Easy recovery from overloads; no need to replace a fuse.
Mercury Maverick 850VA Offline Backup UPS
Mercury MP Pro 6kva Online Single Phase UPS
- Application: Small network, servers and other IT equipment
- High frequency and double conversion on-line technology
- Fully digitized microprocessor control
- Wide input voltage range
- UPS startup without battery
- Cold start
- Advanced battery management
- Advanced battery charge in UPS off mode
- Lightning and surge protection
- Short circuit and surge protection
- Fan speed auto control when loads varies
- Optional extension battery pack
- Load capacity display
- Smart RS232 communication with monitoring software
- Optional SNMP Card slot